TVShow S02E16X59 ASMR Oncologist
Cancer is a serious diagnosis.
Allow Dr. Miller to trigger you in to a comforted demise.


The medicinal knowledge displayed is on par with other ASMR role play videos. Do not employ this method of advanced procedure to diagnosis your self.

(Notation)
Admittedly poorly paced and toned for a proper role play of an ASMR role play.

(Observation)
While constantly reminded how much it displeases me to be on camera, some lighting angles shove it in, deep, and break it off inside. I am not half asleep, merely victim to biology and misplaced fluorescence.
TVShow S02E15X58 Seagully
TVShow S02E14X57 ASMR Wood Shop
TVShow S02E13X56 Arduino Beatdet
This 4 channel Arduino Beatdet (bidet) rocks your spots off. Select a beat on your phone and the Beatdet will jam out while it cleans you out. The Pirate Radio Bellagio of bidets. Authentic streaming music. Beatdet Pro allows you to choose any track on your phone to wipe with.



Notable thanks to MakerBar in Hoboken, New Jersey

It should be noted that this, as are most of our projects, a prototype, and surely demands several refinements; for example, superior nozzles for a more effective spray.

Arduino Speaky
// Arduino Beatdet Bidet | TVMiller
// MSGEQ7 Script | J Skoba
// WTV020-SD-16P | Diego J. Arevalo

#include <Servo.h>
#include <Wtv020sd16p.h>

// Servo
Servo sprayarm;
int pos = 45;

// Music Player
int resetPin = 14;
int clockPin = 15;
int dataPin = 16;
int busyPin = 17;
Wtv020sd16p wtv020sd16p(resetPin, clockPin, dataPin, busyPin);

// EQ Pins
int analogPin = A2;
int strobePin = 2;
int resetPin = 3;
int spectrumValue[7];

// LED Pins
int one = 8;
int two = 9;
int thr = 10;
int fou = 11;

// LED Variables
int ledone = 0;
int ledtwo = 0;
int ledthr = 0;
int ledfou = 0;

// Pump Pins
int pumpo = 4;
int pumpt = 5;
int pumph = 6;
int pumpf = 7;

// Pump Variables
int pmpone = 0;
int pmptwo = 0;
int pmpthr = 0;
int pmpfou = 0;

// BlueTeethes
char inbound = 0;

void setup()
{
Serial.begin(9600);

wtv020sd16p.reset();

sprayarm.attach(12);
sprayarm.write(pos);

pinMode(analogPin, INPUT);
pinMode(strobePin, OUTPUT);
pinMode(resetPin, OUTPUT);
analogReference(DEFAULT);

pinMode(one, OUTPUT);
pinMode(two, OUTPUT);
pinMode(thr, OUTPUT);
pinMode(fou, OUTPUT);

pinMode(pumpo, OUTPUT);
pinMode(pumpt, OUTPUT);
pinMode(pumph, OUTPUT);
pinMode(pumpf, OUTPUT);

digitalWrite(resetPin, LOW);
digitalWrite(strobePin, HIGH);
}

void loop()
{

// Clear Audio
wtv020sd16p.stopVoice();

// Wait for Track
if (Serial.available() > 0)
{
// Which Track Number
inbound = Serial.read();
if (inbound == '1') {
// Track 1
armout();
wtv020sd16p.playVoice(0);
spray();
wtv020sd16p.stopVoice();
armin();
}
else if (inbound == '2') {
// Track 2
armout();
wtv020sd16p.playVoice(1);
spray();
wtv020sd16p.stopVoice();
armin();
}
else if (inbound == '3') {
// Track 3
armout();
wtv020sd16p.playVoice(2);
spray();
wtv020sd16p.stopVoice();
armin();
}
}

}

// Arm Out
void armout() {
for (pos = 45; pos <= 97; pos += 1) {
sprayarm.write(pos);
delay(15);
}
}

// Arm In
void armin() {
for (pos = 97; pos >= 45; pos -= 1) {
sprayarm.write(pos);
delay(15);
}
}

void spray() {
// Loop 15 Seconds
for (int t = 0; t < 5000000, t++) {

// EQ Reset
digitalWrite(resetPin, HIGH);
digitalWrite(resetPin, LOW);

// EQ Store Values and Print
for (int p = 0; p < 7; p++)
{
digitalWrite(strobePin, LOW);
delayMicroseconds(30);
spectrumValue[p] = analogRead(analogPin);
// Serial.print(" ");
// Serial.print(spectrumValue[p]);
digitalWrite(strobePin, HIGH);
}
// Serial.println();

// Map Audio to LED and Pumps
ledone = spectrumValue[0];
// Constrain Required to Limit Results
ledone = constrain(ledone, 400, 600);
// Lower Power to Lower Elevation
ledone = map(ledone, 400, 600, 0, 190);
analogWrite(fou, ledone); // 0
analogWrite(pumpf, ledone); // 0
// Serial.print(ledone);
// Serial.print(" ");

ledtwo = spectrumValue[1];
ledtwo = constrain(ledtwo, 550, 600);
ledtwo = map(ledtwo, 550, 600, 0, 190);
analogWrite(one, ledtwo); // 1
analogWrite(pumpo, ledtwo); // 1
// Serial.print(ledtwo);
// Serial.print(" ");

ledthr = spectrumValue[4];
ledthr = constrain(ledthr, 130, 160);
ledthr = map(ledthr, 130, 160, 0, 190);
analogWrite(two, ledthr); // 2
analogWrite(pumpt, ledthr); // 2
// Serial.print(ledthr);
// Serial.print(" ");

ledfou = spectrumValue[6];
ledfou = constrain(ledfou, 110, 150);
ledfou = map(ledfou, 110, 150, 0, 190);
analogWrite(thr, ledfou); // 4
analogWrite(pumph, ledfou); // 4
// Serial.print(ledfou);
// Serial.println();

}
}

Archive
HackADay.io - Arduino Beatdet
DC Motor Control - https://learn.adafruit.com/adafruit-arduino-...motors/breadboard-layout
MSGEQ7 - http://nuewire.com/info-archive/msgeq7-by-j-skoba/
BlueTooth - http://www.allaboutcircuits.com/project ... our-phone/
WTV020SD Module - http://electronics.stackexchange.com/qu ... 020sd-mini
MIT App Inventor - http://ai2.appinventor.mit.edu/
MakerBar Sign
The while awaiting for the 3D printer to complete the 1 hour and 15 minute run on a series of minute nozzles for another developing project, I had decided in my final days with in the MakerBar space to create a much needed front door sign utilizing the dreaded LEDs I have come to both despise and support...because ooh and ahh. CNC MDF RGB OMG Sigh.



Featuring "I Have No Idea" by Suzy Sellout (Kathrine Becker)

Archive
HackADay.io - MakerBar Sign