TVShow 3X21 Ancestry DNA
14:40.13 157-17 OTC


Notation(s)
1. Focus solo is bogus.
2. I could care less for any linguistic errors.
Spanish is a ridiculous antiquated language.
3. "Privacy is important" [beat] "Send my DNA for fun" - idiots.
TVShow 3X20 Oh Baby Boy
06:12.59 151-17 OTC


TVShow 3X19 Flashing Light Prize (6) Arduino 101 Break Up (FAIL)
19:36.17 134-17 OTC


Parting is such sweet elation.
Elevation change per 0.15 meters (0.5 foot) measured by BMP180 triggers relay state.
Good riddance, Arduino 101. May your gibberish never stain my IDE again.

Ingredients
1. Arduino 101 (34 gr)
2. BMP180 Module (4 gr)
3. TIP120 (1 gr)
4. 2.2K Resistor (<1 gr)
5. 5V Incandescent Bulb (<1 gr)
6. 9V Battery (42 gr)
7. Battery Holder (1 gr)
8. Latex Balloons (Helium)
9. String

Notation(s)
1. Project worked to perfection--right up until the balloons were purchased. After having not acquired enough balloons (12) for lift, a stripping down of materials and conversion to a lighter 12 volt battery resulted in an accidental overload and in brief - kaput! Secondary to this, let it be known that filming string hung peripherals and balloon flight at night with low budget production is as impractical as this whole venture.

2. 1 liter of Helium lifts 1 gram. 12" latex balloon volume is 15L. Horse shit!

Arduino Skyetch
// Flashing Light Prize (6) Arduino 101 Break Up
// BMP180 Code by Sparkfun
// VijeMiller

#include <SFE_BMP180.h>
#include <Wire.h>

// BMP180
SFE_BMP180 pressure;
double base;

// States
int last = 0;
int up = 0;
int state = 0;

// TIP120
int light = 7;

void setup()
{
Serial.begin(9600);

pinMode(light, OUTPUT);
digitalWrite(light, LOW);

// BMP180 Working?
if (pressure.begin())
Serial.println("BMP180 init success");
else {
Serial.println("BMP180 init fail (disconnected?)\n\n");
while (1);
}

// Create Base Line
base = getPressure();
Serial.print("Base Line Pressure: ");
Serial.print(base);
Serial.println(" mb");
delay(2000);
}

void loop()
{
double a, P;
// Get Pressure
P = getPressure();
// Different Between Base and New
a = pressure.altitude(P, base);

Serial.print(a * 3.28084, 1);
Serial.println(" feet");

// Higher by 0.5 Feet or More?
if (a >= up) {
if (state == 0) {
digitalWrite(light, HIGH);
state = 1;
} else if (state == 1) {
digitalWrite(light, LOW);
state = 0;
}
}

// Add 0.5 Feet
// Store Last
up = a + 0.1524;

delay(500);
}

double getPressure()
{
char status;
double T, P, p0, a;
status = pressure.startTemperature();
if (status != 0)
{
delay(status);
status = pressure.getTemperature(T);
if (status != 0)
{
status = pressure.startPressure(3);
if (status != 0)
{
delay(status);
status = pressure.getPressure(P, T);
if (status != 0)
{
return (P);
}
}
}
}
}

Archive
https://hackaday.io/project/26130-flashing-light-prize-6-arduino-101-break-up
http://flashinglightprize.com
https://vid.me/dQgsN
TVShow 3X18 13 Inches Deep Trailer
10:49.59 132-17 OTC
Sequel to the Mandy Moore thriller 47 Meters Down and Alexandra Park's terrifying 12 Feet Deep comes the next aquatic dread, 13 Inches Deep. That's what she said.


Alternate Titles
1. 13 Inches Below
2. 13 Inches Depth
3. 13 Inches
4. 13
5. Tub
TVShow 3X17 LeBogue for Men by Repel
16:55.13 128-17 OTC


Get your special Repel gift bag with any purchase of LeBouge for Men.
Available at CVS, Riteaid and Golden Corral.

Notation(s)
1. A cordial cease fire on TVShow end tag.